Posted on 1 Comment

My first doll for sale

Hi there!

It’s taken quite a while from the first days of sculpting to hitting ‘publish’ on her page, but my 3rd fully articulated doll is finished and is for sale! It’s exciting and more than a little scary, to put any kind of price tag on something that has taken so long for me to be happy with, and she’s probably still a little under-valued considering just how much work has gone into everything, but there has to be a point where I stop saying ‘Ooh I could make one of those for my doll!’ and call her done!

I’ll keep it brief here, but there’s a link on my front page to ‘For Sale‘, which will tell you all about her, and show you all her lovely accessories!

I do hope you like her as much as I do, her name is Cera (Seh-Rah) which is derived from cerise, for the colour cherry.

Thanks for having a look, please feel free to share her page on social media or to friends, I hope she finds a new home before too long!




Posted on Leave a comment

Pru, my first BJD completed!

Hi there!

So my first handcrafted BJD is finally finished! She was started at the very end of March 2014, and was completed at the end of May 2014.  Once she was all done, I finally named her Pru (Shortned from Prunus Avium – Sweet Cherry) ^____^ I’m so happy with her, she has one full outfit so far, with tights and two cardigans with pockets >_< so cute.  I have made her 3 pairs of shoes, but have only photographed one pair so far.

Well here’s Pru showing off some of the poses she can do first *Warning* Doll nudity!

You can click any image to get a larger view ^_^

P1040204 P1040206 P1040211 P1040214 P1040216 P1040218 P1040219 P1040220 P1040223 P1040225


Finally here are a few photos of her clothed, wearing the wig I made for her.  I do plan to make at least one more wig for her, with less bulk to it, since I fell victim to the common mistake of adding a bit too much hair to the wig  >_<

P1040233 P1040237 P1040241 P1040245 P1040260

So there you have her ^__^ She’s currently lounging around atop our dresser, amongst colourful Ikea doll furniture, and an adorable garden bench I picked up from our local church hall’s recent silent auction!

I’ve been adding all sorts of miniature ornaments and trinkets to her wee bookshelf (ooh! still have to make some tiny books!)and have some new bits and bobs to take photos of soon, but for now…that’s me all up to date!

For anyone reading the blog in sequence, everything up to now has been past tense, as my husband was tweaking my website whilst I sculpted Pru, so everything from here on should be more present tense!

Thanks so much for reading, please feel free to comment!


Posted on Leave a comment

Sanding, priming, painting

Hi there!

Well the doll was very nearly finished at this point, all the pieces were effectively finished, barring some minor tweaks around joints and the face.  Ears were in place, and lots of fiddling around with the headcap interior had been done.  I put a magnet and hook clasp into the headcap, which works, but isn’t very sturdy unfortunately, I will try something different next time round.

IMG_2040 IMG_2044 IMG_2045

Here’s some final test stringing, she can hold poses beautifully, and can easily balance on one leg, and do suwarrico ‘cute’ sitting.  The final steps then, were sanding with a high grade paper, and spray priming (and repeating as many times as needed to achieve a super smooth finish!)

I had decided to prime and paint my doll with acrylic paints, although in hindsight, I didn’t really need to do as much super smooth sanding as I did (since I wasn’t making her to be moulded and cast in resin).

IMG_2082 IMG_2083

Here you can see I improvised a stand to separate and hold all the doll bits on as I sprayed them, and the lovely grey colour of the primer.  It’s a ‘Rustoleum’ car filler-primer, recommended by lots of doll makers for this purpose.  The colour helps you to see imperfections that may be unclear when working with different coloured modelling materials, or semi-transparent ones.  If I was planning to mould and cast my girl in resin, then this stage would be very important to achieve a smooth, castable surface.

IMG_2107 IMG_2109 IMG_2113

After priming, I then used a flesh coloured acrylic paint to build up the skin tone using many, many, many thin layers.  I was careful not to leave brush marks, or allow the paint to build up and change the shape of the sockets anywhere.  After the acrylics came the body blushing, using dry pastels and a paint brush to lightly colour around the extremities, adding warmer patches of colour to the skin, adding realism.  I used another ‘Rustoleum’ product, a clear protective top coat spray, in matte, between layers of pastel to fix them in place, and build up denser colour in areas where it was needed.  Finally, I used very sharp watercolour pencils to draw in the lower eyelashes, eyebrows and lips, coating with a final layer of clear spray.

Hello there!

The face-up was essentially complete, though I did add home-made eyelashes too, using synthetic hair curled very carefully with hair straighteners.  They’re ok, but only stuck in with PVA glue, so I could potentially peel them off and remake them in the future. (I’m far too stingy to buy proper doll sized fake eyelashes right now!)

IMG_2125 IMG_2127

Before I shifted gears and started sewing her some tiny clothes, I made her a wig!  Using the same wefted synthetic hair as her eyelashes (unpicked from a weird elasticated hairy-hair bauble from Primark!!!)  I sewed lengths of the wefted hair to a crocheted wig cap, which was in turn held in place by three velcro dots that were glued directly to her head, with the corresponding dots sewn to the inside of the wig.  This makes styling and brushing and tying up her hair a lot easier!

Next time – final photos of the doll, the wig and her outfits!



Posted on Leave a comment

Hands and feet!

Hello again!

The last parts of my doll to be sculpted were the hands and feet, partly because I was worried about how fiddly they’d be!


IMG_2012 IMG_2019 IMG_2039


There was definitely some trial and error with both hands and feet, I drew up a plan beforehand, but didn’t fully understand the nuances of how these limbs would flow once attached…The feet weren’t too bad, they were perhaps a little too tall, and the ball too pronounced.  Next time I would keep them quite low, and try to get more curves underneath – though it’s important to have the feet sit flat if you want your doll to be able to balance on them!

The hands look nice enough here, I built up the fingers on individual wires first, letting them dry before adding palms and rolling little balls separately.  However once I tested them out I realised they were too ‘long’, they didn’t look right when the doll was stood and the hands were flexed to have the palms point at the floor, they looked like they were bending above the wrist :/

The hands I decided to remake altogether, since I thought they were also a smidge on the small size too…though I found It hard to know wether to proportion them against the size of the body, or the head, which I was deliberately making larger than it would be in reality.  I guess I went for a middle ground in the end!


The second pair of hands and a peek inside the head cap!


I was also working on my THIRD head at this point too!  Having joined a forum for BJD artists, I was reading it every day, and quickly learning a lot more about how these dolls function, and how to sculpt for that function.


IMG_2023 IMG_2024 IMG_2025 IMG_2032


This time round I opened the head cap, removed the core, and then tried to focus on getting the blank base symmetrical and fairly smooth before rushing into sculpting features!  Once I had the base looking good, I pencilled on her features, and got stuck in!  I used a scalpel to cut out the eye holes roughly from the outside first, then built up some features, and used my newly acquired dremel-style tool to sand out spherical holes on the inside, to thin out the eye wells (to fit the eyeballs into).  I don’t know how I would’ve finished this doll without that tool, it’s seriously handy.

I was using my usual assortment of toothpick/needle/proper sculpting tool to refine the facial features, but found the very best tools to be the tiniest sanding bits from the drill, used once dry, held manually in hand.

I was really happy with how she was looking already, definitely a keeper 😉

Thanks for reading!





Posted on Leave a comment

Test stringing, and another head!

Hi there!

The next thing I had to work on for my doll, was beefing up the arms and legs…they were just too skinny, and unfortunately this meant having to beef up the joints as well…not ideal.  I just added a little at a time, and smoothed each new bump and curve with a wet finger.  The paperclay takes new additions very nicely, and smoothes well with a little water.

the limbs enlarged before the joints…dodgy
working well enough to test string though!

I was delighted to be able to test string her at this point ^__^ I used a round elastic that was around 1mm thick, since it was all I had, and used snippets of cotton bud sticks as placeholders for the hands and feet.  I hadn’t gotten as far as the neck hole on the head, so I couldn’t test it out yet.

IMG_1984 IMG_1987 IMG_1994

Once I had gotten the joints and limbs to the same thickness again (and added some ‘padding’ to her booty and hips!), I gave her another go ^__^ I was really happy with how she looks here.  She could even stand up alone on those little sticks!

another head!?!

Since the body was going well, I looked back at the head i was working on, and decided that neither the first nor second head were going to cut it!  The first was too blehh, the second was maybe too small!?  So I started yet another, haha! I went a smudge bigger with the overall size, knowing that I would be able to cut/sand it down to be symmetrical, and hoping it would look ‘cute’ and childlike, as I wanted.  I had been obsessively reading posts in a forum I had joined for BJD artists (The Joint),  and had a better grasp again of how the head should work, and be shaped.  So the profile view shown here has a better looking neck hole curve.  This took me up to the 21st April, and 4 weeks into my project ^__^


Next time – Hands and feet!


Thanks for reading!


Posted on Leave a comment

The second head, and limbs!

Hi there!

Here’s some more about my process of making my first BJD doll ^__^

After splitting the torso, I was able to work some more on the second head that I’d started, and tried out some different methods of sculpting.  I was finding it easier to sand away the dried clay to add definition and refine shapes, rather than to shape it too much with the wet clay.  I was also wetting the dried clay with a paintbrush, and adding fine details with a large sewing needle!

The second head i tried to sculpt
getting more practice at sculpting faces

It’s definitely helpful to do a few heads I think, There’s clear improvement from head to head, and so much to learn about how BJD’s work!  Getting the cut of the head cap in the right place so you can still fit your fingers in for the eyes, but not so far forward that the seam is visible past the wig… Also for me, learning to slow down and get the base right before putting on the features.  I found it very useful to try to get the featureless base sanded and symmetrical, and make sure the forehead is big enough (a common problem) before getting into the features.  I would also strongly advise getting your eyes set in place early on too!  Trying to shift an eye around after you’ve got the nose just night is a nightmare!

scrawny arms drying on straws
the initial cuts to accommodate the ball joints

The arms started off pretty basic and thin.  Drying out propped up in a pincushion until i could slide out the straw inner.  I drew my planned cuts for the joints, but ended up cutting them further until they were quite flat – this was because the arms weren’t fat enough!  The ball joints were the right size according to my plan, but they were too big to be worked into the straw-hollows :/  I have since decided that the shoulders are too angular too, the balls should’ve been placed more in line with the arms, instead of jutting out so much.  You learn so much so quickly when you make your first doll!

this is how the elbow joints started
the knee joints and hips

The elbow, knee and hip joints started out as above, and were gradually built onto, and shaped to move nicely back and forth.  Finally, I had also returned to the torso, and added a ‘nubbin’ to the front and back of the lower section, to catch the upper half onto when posing, to enable her to hold the most extreme forward and back bends more easily.

front nubbin
back nubbin

These took me up to the 10th April, so apart from hands and feet, I had most of my doll fleshed out (so to speak) in a little over 2 weeks.


Test stringing and ANOTHER head next time!


Thanks for reading!


Posted on 1 Comment

Beginning my first BJD

Years ago I bought a head.  An Obitsu doll head.  I was really interested in the style of dolls, but could only afford the head to start with.  I bought it some eyes, then promptly forgot all about it for a couple of years!

Obitsu head custom
The Obitsu head finally got a face and hair!

I discovered Monster High dolls, and realised you could customise them too, so bought a few since they were significantly cheaper!

MH sugar skull custom
The first Monster high doll that I customised

With obsession levels building, I had soon purchased a Hujoo baby Suve doll, and a Pong Pong Pukifee doll to learn to customise for myself! (Poor Pong Pong is still waiting her turn to be done!)

Hujoo Suve custom
My Hujoo Baby Suve

Once I had seen Marina Bychkova‘s beautiful Enchanted Doll website, and read about how she had sculpted the dolls herself…I was determined to make my own too!  Though at the moment I have no intention of getting into Resin casting, or porcelain casting, I do want to focus on one of a kind paper clay dolls for the time being. (The recent purchase of a 3D printer might tell you something about our future plans though…hehehehh)

1st bjd plans
The first draught of my bjd plan


1st bjd head
By the time I thought to take a photo, I had already started a second head!

I had bought a 16oz pack of creative paperclay, and had read a few online tutorials, so I knew to start with a removable base shape to build the clay onto.  I made mine from tin foil, over plastic drink straws.  The first layer takes a few days to fully dry, but once it does, it feels nice and light, and sands smooth very nicely ^__^

I just went for it with the first head, I hadn’t tried to sculpt anything since my teens (and i’m in my thirties now!) so it looked a bit rough, and less than ideally shaped.  I decided to start a second one, and work on both simultaneously, to see which one I preferred.

bjd plan and core
I drew more accurate plans, and started the torso

Since paperclay takes ages to dry if it’s thick, I decided to start the torso pretty quickly too, using the same armature materials as the head, which came out quite easily once I’d cut the head-cap off ^__^

1st bjd torso1st bjd torso cut1st bjd torso smoothed

Here you can see I’ve added a layer of clay, added a little definition, and let it dry fully before cutting in half along the rib line.  Once I’d removed all the tin foil, I built up a rounded lip onto the lower torso section, to allow the top section to move smoothly over it.

More development next time!

Thanks for reading!


Posted on Leave a comment

Where it all began…an introduction

Hello!  Welcome to the first post of my new blog, and new website!

I guess a little introduction would be appropriate…sissors_disc_icon

I’ve always been making things and drawing and painting, but since my teens, I’ve also been working pretty much full time.  This has always given me the excuse I suppose, to allow the fear of potential failure to stop me from going for it, and committing to my crafts in a business sense.  Recently though, my husband and I were blessed with a beautiful daughter, and I took a year off work for maternity leave, deciding ultimately not to return to work so I could raise her myself, with no worries about retail shift patterns and childminders!

I’ve been fascinated by miniatures since I was a little kid really, I bought and filled my own dollhouse, making some decidedly sketchy looking dolls (which I still have) from Fimo, fabric and pipe cleaners!  Then a few years ago I discovered ball-jointed dolls (BJD’s) and became hopelessly obsessed!  They’re highly poseable, endlessly customisable, and if so inclined you can make and change their eyes, wigs, clothes…

So now I’m a stay-at-home mum, who’s bubbling over with a lifetime of ideas and crafting potential!  We moved into our first real house last year, and we have a spare room which has been dubbed ‘The Studio’ ^__^  This is now my hub of activity during nap time, after bedtime, and whenever our daughter Evey isn’t interested in playing with me!

I’m going to backtrack a bit, and document how I started making BJD dolls… (though right now I’m not ‘quite’ finished my first!)


Wee eyeballs drying on pins
Wee eyeballs drying on pins
Tin of eyes
Tin of eyes


It all started with the eyes…Having read endless tutorials online, I decided to have a go! They’re not for any specific project, they’re all different sizes and styles, but I knew back then that I wanted to make ‘things’ that would need eyes…So these are simply Fimo half domes, with an indent pressed into the top, which is then baked, painted/drawn onto with the iris design and pupil.  The indent is then filled with liquid Fimo, and baked again to harden.  The liquid Fimo creates the bulge over the iris, which is then finished off with a coat of glossy Fimo varnish over the whole thing.

Naturally the first thing I did with them was to mess about with my husband’s things.  Sticking eyes onto all his statues and figurines…




Well I reckon thats about enough to start with, I’ll post next with the beginnings of my very first BJD! 😀

Thanks so much for looking!