Blythe - TBL/DBS - 3D Printed Neck Joint
3D Printed Blythe Doll Neck Joint. Sold individually (Includes one neck joint and one screw for installation only)
Please watch this installation video before placing your order: Neck Joint Video. Please also read the installation guide: Neck Joint Instructions
These neck joints are for a specific type of doll body (Azone S Pure Neemo - pictured) to add more mobility to the TBL (DBS/AliExpress) Blythe head. In addition to rotation, the head will be able to tilt forwards and back, and from left to right. We have a different listing with joints for the genuine GSC Good Smile Company heads.
You will need to cut off a piece of the neck in order to install the joint, this must be installed by an adult. These joints have not been made for other body types, so I cannot advise on their compatibility.
Blythe Head Types: As shown in the installation video, the neck joint fits into shaped recesses in the front and back of the doll’s head. Please check that your doll’s head has these recesses before ordering your neck joints. I have seen one type of face that did not have this recess, and as such the joint can not be installed properly.
As with any customisation, there are risks to the doll/body and yourself, we are not responsible for any damage caused, so please install with care!
Please be aware, there are more and more varied face plates being produced by different companies, and as such there is no guarantee that these neck joints will fit your specific head perfectly - adjustments may be required - please don't order if this is an issue for you.
We have sourced filament which reasonably closely matches the most common body colours. Please see the pictures for colour comparisons.
___
Please be aware there may be a slight colour variation between your display and the item’s true colour.
These are handmade items intended for display use only with adult collectable dolls, they are not for children.
These items are handmade and 3D printed, there are likely to be small flaws and layer lines due to their production method. We consider this to be a normal part of the product and cannot accept returns due to this factor alone. Please do not order if you think this will be a problem for you.
3D Printed Blythe Doll Neck Joint. Sold individually (Includes one neck joint and one screw for installation only)
Please watch this installation video before placing your order: Neck Joint Video. Please also read the installation guide: Neck Joint Instructions
These neck joints are for a specific type of doll body (Azone S Pure Neemo - pictured) to add more mobility to the TBL (DBS/AliExpress) Blythe head. In addition to rotation, the head will be able to tilt forwards and back, and from left to right. We have a different listing with joints for the genuine GSC Good Smile Company heads.
You will need to cut off a piece of the neck in order to install the joint, this must be installed by an adult. These joints have not been made for other body types, so I cannot advise on their compatibility.
Blythe Head Types: As shown in the installation video, the neck joint fits into shaped recesses in the front and back of the doll’s head. Please check that your doll’s head has these recesses before ordering your neck joints. I have seen one type of face that did not have this recess, and as such the joint can not be installed properly.
As with any customisation, there are risks to the doll/body and yourself, we are not responsible for any damage caused, so please install with care!
Please be aware, there are more and more varied face plates being produced by different companies, and as such there is no guarantee that these neck joints will fit your specific head perfectly - adjustments may be required - please don't order if this is an issue for you.
We have sourced filament which reasonably closely matches the most common body colours. Please see the pictures for colour comparisons.
___
Please be aware there may be a slight colour variation between your display and the item’s true colour.
These are handmade items intended for display use only with adult collectable dolls, they are not for children.
These items are handmade and 3D printed, there are likely to be small flaws and layer lines due to their production method. We consider this to be a normal part of the product and cannot accept returns due to this factor alone. Please do not order if you think this will be a problem for you.
3D Printed Blythe Doll Neck Joint. Sold individually (Includes one neck joint and one screw for installation only)
Please watch this installation video before placing your order: Neck Joint Video. Please also read the installation guide: Neck Joint Instructions
These neck joints are for a specific type of doll body (Azone S Pure Neemo - pictured) to add more mobility to the TBL (DBS/AliExpress) Blythe head. In addition to rotation, the head will be able to tilt forwards and back, and from left to right. We have a different listing with joints for the genuine GSC Good Smile Company heads.
You will need to cut off a piece of the neck in order to install the joint, this must be installed by an adult. These joints have not been made for other body types, so I cannot advise on their compatibility.
Blythe Head Types: As shown in the installation video, the neck joint fits into shaped recesses in the front and back of the doll’s head. Please check that your doll’s head has these recesses before ordering your neck joints. I have seen one type of face that did not have this recess, and as such the joint can not be installed properly.
As with any customisation, there are risks to the doll/body and yourself, we are not responsible for any damage caused, so please install with care!
Please be aware, there are more and more varied face plates being produced by different companies, and as such there is no guarantee that these neck joints will fit your specific head perfectly - adjustments may be required - please don't order if this is an issue for you.
We have sourced filament which reasonably closely matches the most common body colours. Please see the pictures for colour comparisons.
___
Please be aware there may be a slight colour variation between your display and the item’s true colour.
These are handmade items intended for display use only with adult collectable dolls, they are not for children.
These items are handmade and 3D printed, there are likely to be small flaws and layer lines due to their production method. We consider this to be a normal part of the product and cannot accept returns due to this factor alone. Please do not order if you think this will be a problem for you.
Non Tracked shipping is only insured up to a value of £20 - Use Tracked shipping for orders over £20 to be fully covered in the event of a lost parcel.